SEP1001RWN Wireless Video Baby Camera User Manual Hanwha Techwin

FCC TEST REPORT Report No.: EMC-FCC-R0074http://www.emc2000.co.krAnnex 6. User manual EMC compliance Ltd.480-5 Shin-dong, Yeongtong-gu, Suwon-city, Gyunggi-do , 443-390 , Korea82 31 336 9919 (Main) 82 31 336 4767 (Fax)This test report must not be reproduced except in its entirety without written approval. (877) 349-3149.SEW-3037WEnglishTo extend your one-year warranty by three months, go to www.samsungsv.com and register your product.SEW-3037W-ENGLISH.indd 12012-08-17 오후 4: 34:23IMPORTANT SAFETY INSTRUCTIONS1.Read these instructions.3.Heed all warnings.2.4.5.6.7.SafeVIEWUser ManualCopyright©2012 Samsung Techwin Co., Ltd. All rights reserved. Trademark is the registered logo of Samsung Techwin Co., Ltd. This product name is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademarks of their respective companies.RestrictionSamsung Techwin Co., Ltd reserves the copyrights of this document.Under no circumstances shall this document be reproduced, distributed or modified, in part or completely, without the express authorization of Samsung Techwin. the sole responsibility of the user.SamsungTechwin reserves the right to change the contents of this document without notice.SEW-3037W-ENGLISH.indd 28.9.Save these instructions.Follow all instructions.Do not use this device near water.Clean only with a dry cloth.Do not block any ventilation openings, install in accordance with manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat. plug type. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. Either the wide blade or the third prong are provided for your safety. If the provided plug does not fit your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and point of exit from the apparatus.11.Use only with attachments/accessories specified by the manufacturer.12.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when not in use for long periods of time. long periods.14.C Refer all servicing to qualified service personnel. Servicing is required when the appliance has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled, or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been abandoned. WARRANTY CONDITIONS FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no warranty that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment equipment and the monitor.• Connect the equipment into an outlet on a circuit different from that to which the monitor is connected.• Consult the dealer or an experienced radio/TV technician for help. out of child's reach.NEVER place camera or cords within 3 feet of crib or playard.Never use extension cords with AC adapters.Use only supplied AC adapters.• Assembly or installation by adult required.• This product contains small parts that may cause choking. Keep small parts out of reach of children.• This product is NOT intended as a substitute for proper supervision of children. of your child, as this product will not alert parents to quiet activities of a child.• Before using this product, read and follow all instructions in this booklet, and read and follow all instructions and warnings on the product.SEW-3037W-ENGLISH.indd 3• NEVER use the transmitter or monitor near water, including near a bathtub, kitchen sink, laundry tub, a damp basement, etc.• This product is intended ined for indoor use only.• This product is not intended for use as a medical monitor and its use should not replace adult supervision.• Transmitter detects normal sound levels within 2 to 3 meters (6 to 10 feet) from a child. If the child moves outside of this range, they may not be able to detect sounds coming from them. • It is essential to check the operating range and condition of the transmitting monitor upon initial installation, and periodically thereafter. • Check reception regularly. Test monitor before use and after changing camera location. The wireless signal transfer range may be reduced if there is an obstacle such as a concrete wall between the camera and the monitor. heat sources such as radiators, heat registers, cooking appliances (eg stoves and ovens) and other appliances that produce heat (eg amplifiers, televisions and stereos).• Make sure the product is well ventilated during use.Avoid contact with pillows and furniture that may block ventilation.• Use only the AC adapters supplied with the product, as other adapters may damage the product. pinch points or you could damage the adapters.• When an AC adapter is plugged into a power source, DO NOT touch the exposed end of the AC adapter cord.• Do not use extension cords with AC adapters to avoid entanglement. • This product should only be repaired by qualified and authorized Samsung service centers. • Images and sounds are transmitted by the product over the public airwaves and transmissions may be picked up by others devices. • Be careful if you are using the system to monitor a young child, do not place the camera where the child can reach. sound may be affected. • If this happens, please connect the AC adapter. ............................ .................. 5Setting routeFunctional description................................. .............. .............. 6Powering your monitor .................. .............. .................................. 6System operation .................. .................................................. ................. 6Viewing mode displayInstallationHow to install........................... ....... ................................... 13Wireless monitor ..... ..................................................... ..................... ........... 13Wireless camera .................. ................................... ............... .................... 13AppendixSpecifications............... .............. ................................... 14Troubleshooting .............. .................................................. .. ............ 15 Description of the indicator............................... ................. ................... 8How to use the indicator......... ................... .......... ................................. 8Menu operations .................. ............... ................................ 8How to use the configuration buttons .................................................. ............. 8How to use the setup icon.. ............................ ............................................ 9OverviewGet to know your system monitoring................................10Wireless monitor............... .................................................. ..... ................. 10Wireless camera .................. ......... ........................................ 12SEW-3037W-ENGLISH.indd 42012 -08-17 오후 4:34:2301What's includedWhat's includedPackage contentsThe system comes with the following components:Wireless cameraWireless monitorUser manual and warranty cardPower adapter camera Monitor adapter Plastic anchor (1EA) and screws (1EA) Check your package to confirm that you have received the complete system including all components pictured above.English · 5SEW-3037W-ENGLISH.indd 52012-08-17 오후 4:34:24Getting StartedFunctional DescriptionPowering your monitorAfter opening the box, fully charge the monitor before use. After the initial charge, recharge if necessary. Wireless Monitor You can use the device while charging with the adapter connected, and the device is portable when charged. System Operation The basic operation is as follows: Pairing The units are already paired for your convenience. This button is for adding an additional camera. The user can select the camera number to be assigned. Up to 4 cameras can be paired. power of the monitor must be turned on.2.Press the [MENU] button on the monitor.3.Select [4.Select the camera number by pressing the [$] or [%] button.Press the button [] in ur confirm. A pairing icon appears and look for a camera that enters pairing mode. A countdown appears in the middle of the top icon bar that starts counting from 30 to 0.5. Press the [PAIR] button on the camera. 6.Within 30 seconds, if the monitor successfully pairs with the camera, the monitor will automatically switch to the current camera view.] by pressing the [_] or [+] button. 30 seconds, if no camera is registered, it will display “Out of range icon” and user nn `` After must return to previous camera number via menu operation. Wireless Camera The wireless camera must be plugged in at all times to view .6 Getting StartedSEW-3037W-ENGLISH.indd 62012-08-17 오후 4:34:24 LEDs light up.02Select to monitor important sound with reduced ambient noise.Display will turn off in “VOX” mode if there is no significant louder sound than a certain level within 1 minute .Meanwhile, the monitor screen will turn on as soon as it detects sound around the camera.In SEW-3036W “VOX” mode, you can adjust the sensitivity with [] in the menu.Portable Monitoring Sleep Mode Slide the belt clip up to use the built-in belt clip on the monitor. When not in use, please return the clip to its original position. we of origin. Press the [SLEEP] button to turn off the screen and save battery. Your monitor will continue to detect sound around the camera. Press any button to turn the screen back on.- ON- VOX- OFF Getting Started • H(High): Sets to higher sensitivity. • L(Low): Sets to lower sensitivity. Out of Range SEW-3036WDC IN 6V Night Light / turn off the pilot light. SEW-3036W If the camera and monitor are not paired or the monitor is out of transmission range with the paired camera, the message “Out of range” appears with warning beeps at regular intervals.] onRemote button PTZYou can remotely control the camera to pan, tilt and digital zoom.Use the [$/%/_/+] buttons on the monitor to control the camera.Use [ ] in the menu to zoom in.Chat two-wayPress the [TALK] button during conversation.TALKEnglish · 7SEW-3037W-ENGLISH.indd 72012-08-17 오후 4:34:26View Mode Display Indicator DescriptionDisplays the time which is set on the monitor .It only provides AM/PM time format and no 24 hour format.f NightlightIndicates nightlight is on.How to use indicatora b cde Digital Clockg Monitor Mutefg hi jIndicates monitor speaker is on. mute.Once the high-p Monitor sound is muted, no camera sound is produced.h VOX On Indicates that the position of the power/VOX switch is set to “VOX” mode.i Battery capacity level Indicates the remaining charge of the battery. Indicated in 4 levels, and a discharge warning. j Charging Indicates the battery is being charged by DC input power. If the battery is nearly empty, it will flash to alert the user to recharge the device.a Signal indicator The signal indicator shows the strength of the signal received from the camera. The number of bars in the signal indicator indicates signal strength - One or no bars indicates weak signal and 5 bars indicates strong signal. bC amera number Indicates which camera is displayed on the current screen .When scan mode is selected, this icon flashes.cx 2 Zoom mode Indicates that the current screen is magnified. Use the four directional buttons to scroll the camera. Select x1 in the menu to zoom out. No signal warning "Out of range" message means the monitor cannot access the camera. Please reposition the camera or check camera power.Menu operationHow to use the setup buttonsPress the [MENU] button on the monitor to display the menu screen.] to apply the button Use the [$/%/_/+] button to browse menu, and press [changes.d Night Vision IndicatorIndicates that the camera's night vision mode is on. The screen will appear black/white in this mode.8 Viewing Mode DisplaySEW-3037W-ENGLISH.indd 82012-08-17 오후 4:34:27SEW-3036Wb Camera VOX SensitivitySEW-3036W►►►Enter the menu Move to a level adjustment menu Save the modification Move to another menu by pressing the [_] or [+] button. 3. Adjust the option level by the [$] or [%] button. 4. Press the [nn ``] button to save and finish. return to monitor mode with recording. How to use the setup icon You can record a wireless camera with the monitor using the recording menu where you can view video from the selected wireless camera.d ZoomZoom in on the current image (2x).If you Use multiple cameras, you can set the zoom for each camera. Select which camera to view and scan mode Set which camera is currently being viewed. Each time a different camera is selected, settings for brightness, VOX sensitivity level , camera speaker volume and zoom will be recorded on that specific camera. .If one or more cameras are turned off to be out of range, the monitor will display the “Out of Range” indicator for 10 seconds for that particular camera. camera speaker in this menu. The volume can be adjusted from 1 to 5, with 5 being the loudest setting and 1 being the quietest. [TALK] is pressed. Viewing mode display Press [MENU] button to enter menu setting or exit menu setting. In VOX mode, "OFF" is displayed and should not be selected. In VOX mode, you can select "H" (High) or "L" (Low). If set to "H", the monitor can be triggered by an audio level lower than the “L” setting.g Time Setting Set the time displayed on the monitor. Use the [_] or [+] button to select a field. Use the [$] button or [%] to change the numbers in the selected field.ab cde fgha Brightnessh ResetChoose

to reset the monitor to factory settings. All settings including time and pairing information will be set to factory default settings. Adjusts the brightness of the displayed image. If you are using multiple cameras, you can adjust the brightness of each individual camera.English · 9SEW-3037W-ENGLISH.indd 92012-08-17 오후 4:34:29OverviewDiscover your surveillance systemMonitor without wire After opening the box, fully charge the monitor before use. After initial charge, recharge if necessary. Front Controls Monitor Antenna Receives and sends signals to or from the camera. 3.5" LCD screen Displays video from the camera. Flashes when sound is detected. Power LED indicator will turn green when powered. When the battery is charging, this LED will be green in color. Viewing Buttons: The following controls are used when viewing live video from the camera:••••Press the [$] or [%] button to adjust the camera framing up or down down. Press s Press the [_] or [+] to adjust the camera framing left or right. Press the [] button to turn on/off the night light. While zoomed, use the [$/%/_/+] button to move the screen. from video monitor mode to menu mode operation. In menu mode, press this button to return to monitor mode with saving from selection. SLEEP button Used to turn on/off the screen by pressing this button. turn video back on by pressing any button. Microphone Transmits audio to camera when [ TALK] is pressed and held like a walkie-talkie. Navigation Controls / OK Button / Night Light Use controls to move and select in View Mode, Menu Mode. You can control the PTZ operation. Menu Mode: Use the [$/%/_ /+] button arrows to navigate Menu Mode.] to confirm menu selection. -17 오후 4:34:30Back ControlsTALK buttonBelt clipPress and hold the button to respond to the camera. When carrying the monitor, use the belt clip to hold the monitor on your belt. Kick StandSpeakerProduces the sound transmitted by the camera(s). Use to hold the monitor on a table.- ON- VOX- OFFDC IN 6V04nn `` You must have more than one camera configured on the system when using functions that require more than one camera. OverviewSide Controls Power and VOX ON/OFF slide switchSet this switch to ON or OFF to turn on/off the wireless monitor, and set to VOX to activate VOX mode.Volume +/– ButtonUsed to adjust the volume up/down.DC 6V Power InputConnect the supplied AC adapter to power and/or charge the monitor's battery.(when the monitor is not placed in the optional charging cradle).English 11SEW- 3037W-ENGLISH.indd 112012-08-17 오후 4:34:31Wireless cameraFront and rear controls IR LEDs Infrared LEDs allow viewing in dim or low light conditions.Microphone Receives sounds for area near camera and transmits sound from the camera to the monitor. Speaker Produces the sound transmitted by the monitor. Night Light Button Turns the night light on or off. When the camera is turned on, the night light will automatically turn on. Camera Antenna Sends and receives signals to or from the monitor. DC 6V Connect the adapter to the camera. nn `` Remote control Night Light ON or OFF is only available when the camera is paired with the monitor. Side and bottom controls Power slide switch Turns the camera on or off. PAIR button Press this button to pair with a monitor. Night Vision Sensor Detects the light levels where the camera is placed. system to monitor a young child, do not place the camera within reach of the child.Wireless Monitor1.Place the monitor in a location that will have clear reception with your camera(s).2.R remove the bracket. Carefully unpack the camera. If you are installing cameras that are not supplied with the system, please see the camera pairing section of this manual for installation details. Mount the camera on the wall. Mark the position of the screw hole on the wall, and drill the hole and insert 1 screw, then fix the camera firmly to the wall by placing the bracket on the installed screw and pushing the base down. install on a concrete wall ,drill a hole and use plastic n ``Toanchorto fix.````Use the drilling template to drill holes on the wall for installing the camera.(Page 17) The camera can also be placed on a surface flat, such as a table or shelf, and no mounting hardware is required. and how it will be positioned, and where you will route the cable that connects the camera to the power adapter. Before starting the permanent installation, check its performance by observing the image on the monitor when the camera is positioned in the same place/position where it will be permanently installed and the monitor is placed where it will be used most of the time. time.Adjust the viewing angle of the camera.Use the Pan,Tilt control on the monitor to adjust the viewing angle of the camera.Installation3.05 Do not pull the bracket with excessive leveragenn``Doforce. installation Aim the camera(s) to best optimize the viewing area: select a location for the camera that provides a clear view of the area you wish to monitor, that is free of dust, and is not in line of sight. strong light source or direct sunlight. Avoid installing the camera where there are thick walls or obstacles between the camera and the monitor. STRANGULATION HAZARD - Keep cord out of reach of children.NEVER place camera cords within 3 feet of crib or playard.Never use extension cords with AC adapters.Use adapters only mains supplied.English 13SEW-3037W-ENGLISH.indd 132012-08-17 4:34:32AppendixItemOperating Humidity RangeSpecificationsEnvironment RatingItemOperation Frequency FrequencyTransmitting PowerMonitor SensitivityType of Spread Spectrum TXType of ModulationWeight RateTransmission System GeneralDetails2400 MHz~2483.5 MHz17dGFm Max-88dBmSK0Mbps Panoramic Angle m (eye of sight)Gross Weight: 930gWireless Camera300°110°RoHS CompliantYes for CE Version OnlyRegulatory ComplianceOther Special FeatureDetailsIndoor Use OnlyTilt AngleWeightFHSS Monitor85% RH/ColorlessWireless Camera214 3.5" Resolution (Pixel) 320X240 (RGB) Viewing angle H: 80 degrees, V: 100 degrees Number of cams Supported ErasUp to 4 Cameras BalanceAutoLoud Speaker Output80dBAPower Consumption480mA Maximum Condition Load + Speaker with Voice at Volume 5Operating Temperature Range0°C~+40°COoperating Humidity Range85% RHEnvironmental RatingIndoor Use OnlyCompliance with regulationsFCC/CE480mA Condition Night vision, motor moving and talk back modeRoHS CompliantYes for CE version only0°C~+40°COther special featureVolume control, pairingWeight167gEffective pixelViewing angle (diagonal)IR LED/Nightvision typeSpeaker outputConsumption electricalVOXP level sensingOperating temperature rangeH:640, V:480EFL=3.6mm, F=2.856 degrees8IR LED – 940nm / 5m80dBADC 6V%High: 50dBA / Low: 60dBA14 AppendixSEW-3037W-ENGLISH.indd 142012-08-17 오후 4:34:32TroubleshootingProblemSolutionNo image from camera1.2.3.4.5. rate (i.e. 10fps vs. higher 20fps). No sound (even with both units on)1.Make sure the AC adapter is connected to the camera.2.The monitor's battery may be dead, be sure to charge it using of the included adapter.3.The monitor may be out of range of the camera; be sure to check if the Range LED is on solid.1.Try moving the camera closer to the monitor.2.Remove obstacles between the monitor and the camera.3.Adjust the antenna of the monitor to a vertical position. The batteries will make the power supply unstable and affect the low quality of video/audio. Please fully charge the battery for superior video use. AppendixThis sound is normal feedback that occurs if the monitor and camera are too close to each other. Move them further apart. 06 Your SafeView is emitting high-pitched noise/feedback. make sure the adapter is plugged in. Make sure the cameras and the monitor are both powered on. Make sure the camera is within range of the monitor. Make sure the camera and monitor are paired. Adjust the monitor antenna to a vertical position. Français 15SEW-3037W-ENGLISH.indd 152012-08-17 오후 4:34:32Samsung Techwin cares about the environment at all stages of product manufacturing and takes steps to provide customers with more environmentally friendly products. environment. The Eco mark represents Samsung Techwin's dedication to creating environmentally friendly products and indicates that the product complies with the EU RoHS directive. Proper Disposal of Batteries in This Product (Applicable in the European Union and other European countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their life. When marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels of EC Directive 2006/66. If batteries are not properly disposed of, these substances may harm human health or the environment. To protect natural resources and promote material reuse, please separate batteries from other types of waste and recycle them through your local free battery return system. SEW-3037W -ENGLISH.indd 16Correct disposal of this product (Waste Electrical and Electronic Equipment)(Applicable in the European Union and other European countries with separate collection systems)This marking on the product, accessories or documentation indicates that the product and its electronic accessories (e.g. charger, headphones, USB cable) must not be disposed of with other household waste at the end of its life. To avoid any possible damage to the environment or to human health resulting from uncontrolled waste disposal, please separate these items from other types of wastes and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product or their government office to find out where and how they can take these items for environmentally safe recycling. Professional users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial waste for disposal.2012-08-17 오후 4: 34:32MODELThis template is used to install the camera on the wall. 08-17 오후 4:34:32SALES NETWORKSAMSUNG TECHWIN CO., LTD.Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400TEL: +82-70- 7147 -8740~60 FAX: +82-31-8018-3745SAMSUNG TECHWIN AMERICA Inc.100 Challenger Rd.Suite 700 Ridgefield Park, NJ 07660Toll Free: 1-877-349-3149www.samsungsv.comSEW-3037W-ENGLISH.indd 18SAMSUNG TECHWIN EUROPE LTD.Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey, Surrey, UK KT16 OPSTEL: +44-1932-45-5300 FAX: +44-1932-45-53252012-08-17 오후 4:34 :32