Samsung Galaxy J2 2016 J210F camera failed

Step 1:

To download

and install the Samsung USB driver on your computer. If the Samsung USB driver is already installed on your computer, skip this step.

Step

2: Download

J210F-camera.tar

Step 3:

Now,

To extinguish

your smartphone.

Step 4

: After turning off the phone, you need to boot into download mode. To boot into download mode Press and hold

Lower the volume

,

Homepage

and

power button

at the same time for 5-8 seconds until download mode is active.

Step

5: In the

Download mode

you can see a

Yellow Triangle Warning Sign

.In this situation, you must

hurry

the

Turn up the sound

the key to

Continue

.

Step

6: Now open

Odin3

(found in the extracted files, which you downloaded in the

2nd step

) on your computer. Then connect your Smartphone to the computer.

Step

7: Once you have connected the Smartphone to the computer, Odin will automatically recognize the device and display "

Added

" in the lower left panel.

Step

8: Once your device is detected by Odin, click on the

PDA button

and select the .tar file (you downloaded this file in

2nd step

).

Step

9: Now click on the

Start

button in Odin to start flashing.

Step 10

: Flashing usually takes 30-50 seconds for processing to complete, you may see a

green box

with

Pass

writes on it in Odin.During this process Smartphone

restart automatically

.

Step

11: Once you see, the

Pass

message in Odin, you can

disconnect

your device from the computer.

Step 12: If you are still facing camera failed issue, perform a hard reset.